ZOTUP SPD L 25-100 230 t ff 3+1 PLC

ZOTUP SPD L 25-100 230 t ff 3+1 PLC

ZOTUP SPD L 25-100 230 t ff 3+1 PLC

ZOTUP SPD L 25-100 230 t ff 3+1 PLC

ZOTUP SPD L 25-100 230 t ff 3+1 PLC

ZOTUP SPD L 25-100 230 t ff 3+1 PLC

ZOTUP SPD L 25-100 230 t ff 3+1 PLC

ZOTUP SPD L 25-100 230 t ff 3+1 PLC

Send Inquiry

Request To Call Back

ZOTUP SPD L 25-100 230 t ff 3+1 PLC

Get a Price/Quote

MOQ : 1 Piece

ZOTUP SPD L 25-100 230 t ff 3+1 PLC Specification

Application
Protection against lightning and surge for PLCs and power supply

Phase
3+1 (TNS/TNC systems)

Load Capacity
Maximum continuous operating voltage (Uc): 255 V AC

Remote Control
Yes

Cable Length
Not included

Weight
Approx. 400 g

Mounting Type
35 mm DIN rail

Features
Replaceable module, pluggable with visual fault indicator

Frequency
50/60 Hz

Automation Grade
Automatic

Connectivity Type
DIN rail terminal

Control Type
Surge protection (non-manual)

IP Rating
IP20

Material
Thermoplastic housing, Metal terminal parts

Power
25 kA (8/20 s) per pole

Temperature
-40C to +80C

Voltage
230 V AC

Connection
Multi-stranded or rigid copper wires, 1.5-35 mm2

Standards Compliance
EN 61643-11, IEC 61643-11

Fault Indication
Optical indicator on device

Short-Circuit Withstand
Up to 50 kArms (with backup fuse)

Rating Category
SPD for power supply lines and PLC systems

Response Time
< 25 ns

Maximum Discharge Current (Imax)
100 kA (8/20 s) per pole

Protection Mode
Type 1+2 (Class I + II)

Nominal Discharge Current (In)
25 kA (8/20 s)

Model
L 25-100 230 t ff 3+1 PLC

Replacement Module Code
RM-L25-100-230-PLC

ZOTUP SPD L 25-100 230 t ff 3+1 PLC Trade Information

Minimum Order Quantity
1 Piece

Supply Ability
100 Pieces Per Month

Delivery Time
7 Days

About ZOTUP SPD L 25-100 230 t ff 3+1 PLC

ZOTUP SPD L 25-100 230 t ff 3+1 PLC

L 25/100 230 t ff 3+1 is a ready to install assembly of three voltage limiting and a voltage switching SPD providing ten modes of protection, typically installed in three-phase plus neutral 230/400 V TT-systems where connection type CT2 (3+1) is required according to HD 60364-5-534, e.g. in the Main Distribution Board (MDB).

Impulse test classification: Test class I and II according to IEC 61643-11 Ed. 1 (2011-03) and Type 1 and 2 according to EN 61643-11 (2012-10);
Backup protection is not required with an upstream CB 160 A or up to an Isccr 5 kA rms;
Three colour Status Indicator with progressive indication of remaining performance.

Advanced Surge Protection for PLC Systems

The ZOTUP SPD L 25-100 230 t ff 3+1 PLC is designed to provide outstanding protection to sensitive automation and power infrastructure. With a rapid response time below 25 ns and the ability to withstand up to 50 kArms with a backup fuse, this device ensures system reliability even in extreme conditions. Compatibility with Indian industrial standards assures both safety and resilience.

Easy Maintenance with Replaceable Modules

Equipped with pluggable replacement modules (RM-L25-100-230-PLC) and a visible optical fault indicator, the ZOTUP SPD streamlines maintenance. This feature allows for quick swaps of faulty modules without system downtime, reducing operational interruptions and maintenance costs.

FAQ's of ZOTUP SPD L 25-100 230 t ff 3+1 PLC:

Q: How do I install the ZOTUP SPD L 25-100 230 t ff 3+1 PLC in my electrical system?

A: Installation is straightforward; mount the device on a standard 35 mm DIN rail and connect it using multi-stranded or rigid copper wires (1.5-35 mm2). Ensure connections align with the phase configuration (3+1 for TNS/TNC systems), and follow all relevant safety standards during setup.

Q: What are the main benefits of using this SPD for PLC and power supply protection?

A: The main benefits include high surge handling up to 100 kA per pole, rapid response time (<25 ns), a pluggable replaceable module for minimal downtime, and an optical indicator for immediate fault identification. These features minimize the risk of equipment damage and ensure reliable operation.

Q: When should the replacement module (RM-L25-100-230-PLC) be used?

A: Replace the module when the optical fault indicator shows a fault. This visual cue helps identify compromised protection and supports timely maintenance without full device replacement.

Q: Where can this SPD be used effectively?

A: This SPD is ideal for power supply lines and PLC systems, especially in environments prone to lightning strikes or electrical surges. Its robust construction and type 1+2 classification make it suitable for industries, commercial facilities, and distributed control systems.

Q: What process should I follow for maintenance and checking the device's condition?

A: Regularly inspect the optical indicator for any fault signals. If a fault is shown, use the appropriate replacement module to swap out the damaged unit. Always ensure power is isolated during maintenance, and adhere to relevant electrical safety protocols.

Q: How does the device comply with international safety standards?

A: The ZOTUP SPD L 25-100 230 t ff 3+1 PLC meets EN 61643-11 and IEC 61643-11 standards, ensuring it provides reliable protection and performance in accordance with international requirements for surge protective devices.

ZOTUP SPD L 25-100 230 t ff 3+1 PLC

ZOTUP SPD L 25-100 230 t ff 3+1 PLC

ZOTUP SPD L 25-100 230 t ff 3+1 PLC

ZOTUP SPD L 25-100 230 t ff 3+1 PLC

Tell us about your requirement

Price:

Quantity

Select Unit

50
100
200
250
500
1000+

Additional detail

Mobile number

Email

More Products in Industrial Automation Category

KEB 00.F4.010-7009 BUS OPERATOR RS 485

KEB 00.F4.010-7009 BUS OPERATOR RS 485

Minimum Order Quantity : 1 Piece

Features : Plugandplay, industrial reliability, compact design, multidevice support

Connectivity Type : Bus Operator RS 485

Material : Highquality industrial plastic

Application : Fieldbus communication, industrial automation, KEB drives

Mounting Type : DIN rail mounting

Get a Price/Quote

SINRO SRD02-08230FK2 VARIABLE AIR DAMPER MOTOR

SINRO SRD02-08230FK2 VARIABLE AIR DAMPER MOTOR

Minimum Order Quantity : 1 Piece

Features : Fail Safe Spring Return, Manual Override

Connectivity Type : Wired

Material : Aluminum Alloy

Application : HVAC Air Damper Control

Mounting Type : Direct Mount

Get a Price/Quote

LEADSHINE L5-400

LEADSHINE L5-400

Features : High Precision Compact Design

Connectivity Type : Wired

Material : Aluminum

Application : Industrial Automation

Mounting Type : Horizontal

Get a Price/Quote

TAIYO DS-21-2F AUTOMATIC VOLTAGE REGULATOR

TAIYO DS-21-2F AUTOMATIC VOLTAGE REGULATOR

Minimum Order Quantity : 5 Pieces

Features : Overload Protection, Short Circuit Protection, High & Low Voltage Cutoff

Connectivity Type : Wired

Material : Metal Body with Copper Winding

Application : Industrial, Commercial, Home Appliances

Mounting Type : Wall Mount/Surface Mount

Get a Price/Quote

✕