SCHNEIDER ALTISTART 22 SOFT STARTERS CONTROL CARD

SCHNEIDER ALTISTART 22 SOFT STARTERS CONTROL CARD

SCHNEIDER ALTISTART 22 SOFT STARTERS CONTROL CARD

SCHNEIDER ALTISTART 22 SOFT STARTERS CONTROL CARD

SCHNEIDER ALTISTART 22 SOFT STARTERS CONTROL CARD

SCHNEIDER ALTISTART 22 SOFT STARTERS CONTROL CARD

SCHNEIDER ALTISTART 22 SOFT STARTERS CONTROL CARD

SCHNEIDER ALTISTART 22 SOFT STARTERS CONTROL CARD

Send Inquiry

Request To Call Back

SCHNEIDER ALTISTART 22 SOFT STARTERS CONTROL CARD

Get a Price/Quote

MOQ : 1 Piece

SCHNEIDER ALTISTART 22 SOFT STARTERS CONTROL CARD Specification

IP Rating
IP00 (internal component)

Control Type
Microcontroller based

Phase
Three Phase (used with ATS22 Soft Starters)

Features
Short circuit protection, overload sensing, modular design

Remote Control
Yes

Weight
Approx. 200 g

Frequency
50-60 Hz

Application
Control card for SCHNEIDER ALTISTART 22 Soft Starters

Load Capacity
As per ATS22 specifications

Processor Type
Embedded microcontroller

Drive Type
Soft Starter control

Automation Grade
Automatic

Cable Length
Depends on mounting, typically up to 1 meter

Mounting Type
DIN Rail/Panel mount (as per ATS22 design)

Speed Range
N/A (dependent on soft starter settings)

Connectivity Type
Plug-in type connectors

Sensor Type
Signal sensing via ATS22

Material
High-quality PCB (Printed Circuit Board)

Power
Suitable for ATS22 series ratings

Temperature
-10C to +50C operating temperature

Voltage
24 V DC / 230 V AC (depends on model)

Diagnostic LEDs
On-board status indicators

PCB Layer
Multi-layer

Firmware
Proprietary SCHNEIDER firmware

Insulation Voltage
2 kV AC

Interface
Multi-pin slot or ribbon cable (as per model)

Operating Humidity
5% - 95% RH, non-condensing

Compatible Models
Schneider Electric Altistart 22 (ATS22) series

Standards Compliance
IEC 60947-4-2, RoHS

Typical Usage
Industrial motor starters, pump and fan control

About SCHNEIDER ALTISTART 22 SOFT STARTERS CONTROL CARD

SCHNEIDER ALTISTART 22 SOFT STARTERS CONTROL CARD

Altistart 22 All-in-one Soft Starters for electrical motors from 4 to 400kW Part of Altivar ATS22 is designed for most infrastructure and industrial applications for better in-class protection function and ease of use.

Engineered for Industrial Reliability

This control card is specifically designed to meet the demands of industrial motor starting, offering robust protection and precision control when used with Schneider Altistart 22 soft starters. Its multi-layer PCB and embedded microcontroller provide dependable operation even under varied temperatures and humidity, making it a trusted choice for challenging factory floors.

Versatile Integration and Diagnostics

Plug-in type connectors and flexible mounting options simplify installation within existing automation panels. The on-board diagnostic LEDs provide clear status indicators, ensuring easy monitoring and fast troubleshooting. Remote control is fully supported via the ATS22 interface, enhancing operational efficiency and maintenance flexibility.

FAQ's of SCHNEIDER ALTISTART 22 SOFT STARTERS CONTROL CARD:

Q: How is the SCHNEIDER ALTISTART 22 Soft Starter Control Card installed?

A: The control card is designed for easy integration with Altistart 22 (ATS22) soft starters, using plug-in type connectors and mounting via DIN rail or panel, depending on the ATS22 model. Detailed instructions are provided by Schneider Electric.

Q: What benefits does this control card provide for industrial applications?

A: The card delivers precise, automatic control of three-phase motors, offering features like short circuit protection, overload sensing, and on-board status indicators. Its modular design and diagnostics enhance operational safety and maintainability in applications such as pumps and fans.

Q: When should the control card be replaced or serviced?

A: Replacement is recommended if there are persistent faults indicated by diagnostic LEDs or if physical inspection reveals damage. Routine inspections should follow maintenance schedules specified in the ATS22 documentation. Servicing by qualified personnel is advised for optimal performance.

Q: Where is it compatible and what models does it support?

A: This control card is built for Schneider Electric Altistart 22 (ATS22) soft starters and should only be used with compatible ATS22 models to ensure full functionality and compliance with safety standards.

Q: What is the process for connecting the control card to an ATS22 soft starter?

A: To connect, first power off the soft starter, align the control card with the designated multi-pin slot or ribbon cable interface, and secure as per the user manual. Ensure all wiring follows the ATS22 installation guide before powering on.

Q: How does the control card handle harsh environmental conditions?

A: Engineered for industrial environments, the card operates in temperatures from -10C to +50C and 5%-95% non-condensing humidity. It features a robust PCB and insulation voltage of 2 kV AC, ensuring reliable performance in varied settings.

Q: What are the typical usage scenarios for this control card?

A: The primary applications include controlling industrial motor starters, pumps, and fans. It's suitable for environments that require high reliability, precise motor management, and integration with automated systems in factories, plants, and process industries.

SCHNEIDER ALTISTART 22 SOFT STARTERS CONTROL CARD

SCHNEIDER ALTISTART 22 SOFT STARTERS CONTROL CARD

SCHNEIDER ALTISTART 22 SOFT STARTERS CONTROL CARD

SCHNEIDER ALTISTART 22 SOFT STARTERS CONTROL CARD

Tell us about your requirement

Price:

Quantity

Select Unit

50
100
200
250
500
1000+

Additional detail

Mobile number

Email

More Products in SCHNEIDER SERVO DRIVE Category

VARIABLE SPEED DRIVE ALTIVAR ATV212HO75N4

VARIABLE SPEED DRIVE ALTIVAR ATV212HO75N4

Minimum Order Quantity : 1 Piece

Material : Plastic, Metal (Enclosure)

Weight : Approx. 5.5 kg

Remote Control : Yes

Frequency : 50/60 Hz

Power : 7.5 kW (10 HP)

Get a Price/Quote

PANASONIC MBDHT2510

PANASONIC MBDHT2510

Minimum Order Quantity : 1 Piece

Material : FIBER

Weight : Approx. 3 kg

Remote Control : Yes

Frequency : 50/60 Hz

Power : 2.5 kW

Get a Price/Quote

SCHNEIDER ALTISTART 22 ATS22D47Q SOFT STARTER

SCHNEIDER ALTISTART 22 ATS22D47Q SOFT STARTER

Minimum Order Quantity : 1 Piece

Material : Plastic and Metallic Components

Weight : Approximately 6.5 kg

Remote Control : Yes

Frequency : 50/60 Hz

Power : 47 kW (63 HP)

Get a Price/Quote

SCHNEIDER LXM23CU07M3X

SCHNEIDER LXM23CU07M3X

Minimum Order Quantity : 1 Piece

Material : FIBER

Get a Price/Quote

✕