SIEMENS 7XT3300-0BA00 FF EARTH FAULT RELAY
SIEMENS 7XT3300-0BA00 FF EARTH FAULT RELAY
SIEMENS 7XT3300-0BA00 FF EARTH FAULT RELAY
SIEMENS 7XT3300-0BA00 FF EARTH FAULT RELAY
SIEMENS 7XT3300-0BA00 FF EARTH FAULT RELAY
SIEMENS 7XT3300-0BA00 FF EARTH FAULT RELAY
SIEMENS 7XT3300-0BA00 FF EARTH FAULT RELAY
SIEMENS 7XT3300-0BA00 FF EARTH FAULT RELAY

SIEMENS 7XT3300-0BA00 FF EARTH FAULT RELAY

MOQ : 1 Piece

SIEMENS 7XT3300-0BA00 FF EARTH FAULT RELAY Specification

  • Connectivity Type
  • Terminal Screw Type
  • Phase
  • Single Phase and Three Phase compatible
  • Control Type
  • Electromechanical Relay
  • Features
  • Adjustable sensitivity, LED indication, compact design, fast response
  • Application
  • Protection against earth faults in electrical circuits
  • IP Rating
  • IP20
  • Automation Grade
  • Automatic
  • Weight
  • Approx. 250g
  • Mounting Type
  • DIN Rail Mounting
  • Sensor Type
  • Core Balance Current Transformer (CBCT)
  • Frequency
  • 50/60 Hz
  • Cable Length
  • Dependent on installation
  • Load Capacity
  • 5A (Relay contact)
  • Material
  • Plastic and Metal
  • Power
  • Auxiliary powered
  • Temperature
  • -10C to +55C
  • Voltage
  • 110-240V AC/DC
  • Storage Temperature
  • -25C to +70C
  • Reset Type
  • Manual / Automatic selectable
  • Response Time
  • < 40 ms
  • Sensitivity Range
  • 30 mA to 3 A adjustable
  • Relay Output
  • 1 NO + 1 NC
  • Operating Position
  • Any
  • Standards Compliance
  • IEC 60255, IS 3231
  • Model Number
  • 7XT3300-0BA00 FF
 
 

About SIEMENS 7XT3300-0BA00 FF EARTH FAULT RELAY

SIEMENS 7XT3300-0BA00 FF EARTH FAULT RELAY


20 HZ FREQUENCY GENERATOR FOR EARTH FAULT 100% PROTECTION THE 20HZ FREQUENCY GENERATOR CREATES A 20HZ SQUARE WAVE VOLTAGE WITH AN AMPLITUDE OF APPROX. 25V. THIS VOLTAGE IS CONNECTED VIA BANDPASS AND A LOAD RESISTOR TO THE STATOR CIRCUIT OF THE GENERATOR. THE FREQUENCY GENERATOR IS CONNECT. (THREE PHASE) TO THE VOLTAGE TRANSFORMER. ALTERNATIVELY A POWER SUPPLY VIA THE STATION BATTERY(100,220V DC) IS POSSIB. MAX. POWER CONSUMPT.APPROX.80VA MEASUREMENT VALUE PROCESSING WILL DONE BY 7UM515 IN 7XP20 CASE FOR



Advanced Earth Fault Protection Technology

The 7XT3300-0BA00 FF relay incorporates state-of-the-art detection technology using Core Balance Current Transformer (CBCT) sensors. Its wide sensitivity range enables precise monitoring of leakage currents, resulting in early fault detection and reduced downtime in electrical installations. LED indications offer immediate visual status, while the automatic or manual reset function ensures maximum operational flexibility and safety.


Designed for Versatile Applications

Engineered for compatibility with both single and three-phase electrical circuits, this Earth Fault Relay offers broad application across industrial, commercial, and utility sectors. DIN rail mounting and terminal screw connectivity simplify installation, making it suitable for new or retrofit projects. Compliance with IEC 60255 and IS 3231 standards confirms its reliability and quality for mission-critical protection tasks.

FAQ's of SIEMENS 7XT3300-0BA00 FF EARTH FAULT RELAY:


Q: How does the SIEMENS 7XT3300-0BA00 FF Earth Fault Relay detect earth faults?

A: The relay detects earth faults by utilizing a Core Balance Current Transformer (CBCT) to sense any leakage current between 30 mA and 3 A. When a fault is detected, the relay activates within 40 milliseconds, helping to promptly isolate affected circuits.

Q: What is the process for installing this earth fault relay?

A: Installation involves mounting the relay onto a DIN rail, connecting the wiring through terminal screw type connectors, and calibrating the sensitivity as per system requirements. Its automatic or manual reset can be selected based on operational preference.

Q: Where can the 7XT3300-0BA00 FF relay be used?

A: This relay is suitable for use in various electrical systems requiring earth fault protection, including industrial plants, commercial buildings, and utility substations. It is compatible with both single and three-phase circuits.

Q: What are the benefits of adjustable sensitivity in this relay?

A: Adjustable sensitivity enables precise customization to different installation conditions, allowing detection of both low and high-level leakage currents. This helps ensure protection is neither too sensitive nor too lenient, reducing the risk of nuisance tripping or missed faults.

Q: When should the manual or automatic reset be used?

A: Manual reset is generally selected when a physical inspection or fault analysis is required before restarting the system. Automatic reset is suitable for applications where quick restoration and minimal human intervention are critical.

Q: How does the relay provide indication of earth fault status?

A: The device features an LED indicator that illuminates to show fault presence or operational status, offering easy monitoring for operators and maintenance personnel.

Tell us about your requirement
product

Price:

Quantity
Select Unit

  • 50
  • 100
  • 200
  • 250
  • 500
  • 1000+
Additional detail
Mobile number

Email

More Products in SIEMENS Multifunction Protection Relay Category

SIEMENS 7SK8032-5EB90-1HE0/CC RELAY

SIEMENS 7SK8032-5EB90-1HE0/CC RELAY

Minimum Order Quantity : 1 Piece

Mounting Type : Flush or Panel Mounting

Frequency : 50 / 60 Hz

Sensor Type : Current Transformer, Voltage Transformer Inputs

Remote Control : Yes

Automation Grade : Automatic

SIEMENS 7SJ6225-5EB22-1FE0/GG OVERCURRENT PROTECTION RELAY

SIEMENS 7SJ6225-5EB22-1FE0/GG OVERCURRENT PROTECTION RELAY

Minimum Order Quantity : 1 Piece

Mounting Type : Panel Mounting

Frequency : 50/60 Hz

Sensor Type : Current Transformer Input

Remote Control : Yes

Automation Grade : Automatic

SIEMENS 7SJ6112-5EB22-1FB0/EE OVERCURRENT PROTECTION RELAY

SIEMENS 7SJ6112-5EB22-1FB0/EE OVERCURRENT PROTECTION RELAY

Minimum Order Quantity : 1 Piece

Mounting Type : Flush / Panel Mount

Frequency : 50/60 Hz

Sensor Type : Current, Voltage Measurement

Remote Control : Yes

Automation Grade : Automatic

SIEMENS 7UM6221-2EB92-0AC0/FF PROTECTION RELAY

SIEMENS 7UM6221-2EB92-0AC0/FF PROTECTION RELAY

Minimum Order Quantity : 1 Piece

Mounting Type : Flush/Panel Mount

Frequency : 50/60 Hz

Sensor Type : Integrated Current/Voltage Sensing

Remote Control : Yes

Automation Grade : Automatic



Back to top