Send Inquiry Get a Quote
P. L. C MITSUBISHI MELSEC FX3U-80M
P. L. C MITSUBISHI MELSEC FX3U-80M
P. L. C MITSUBISHI MELSEC FX3U-80M
P. L. C MITSUBISHI MELSEC FX3U-80M
P. L. C MITSUBISHI MELSEC FX3U-80M
P. L. C MITSUBISHI MELSEC FX3U-80M
images Send Inquiry
Request To Call Back

P. L. C MITSUBISHI MELSEC FX3U-80M

Get a Price/Quote
MOQ : 1 Piece

P. L. C MITSUBISHI MELSEC FX3U-80M Specification

  • Load Capacity
  • Depends on I/O configuration
  • Mounting Type
  • DIN Rail or Panel Mount
  • Application
  • Industrial automation, machinery control, process control
  • Sensor Type
  • Supports digital & analog sensors via I/O modules
  • Connectivity Type
  • RS-232, RS-485, Ethernet via Expansion Modules
  • Drive Type
  • Relay/Transistor outputs (depending on model)
  • Features
  • Compact design, expandable I/O, high processing speed, flexible communication options
  • Frequency
  • 50/60 Hz
  • IP Rating
  • IP10
  • Processor Type
  • High-speed processor, proprietary MELSEC architecture
  • Automation Grade
  • Automatic
  • Phase
  • Single Phase
  • Control Type
  • Digital
  • Weight
  • Approximately 1.2 kg
  • Cable Length
  • Depends on network and wiring configuration
  • Speed Range
  • Max. 0.21 s per basic instruction
  • Remote Control
  • Yes
  • Material
  • Plastic, Metal
  • Power
  • 24V DC/AC
  • Temperature
  • 0C to 55C (Operating)
  • Voltage
  • 100-240V AC
  • Extension Capability
  • Expandable up to 384 I/O points
  • Backup Battery
  • Supported for memory retention
  • Withstand Voltage
  • 1500V AC for 1 min between power supply and ground
  • Programming Software
  • GX Developer, GX Works2/3
  • Output Points
  • 40 (Relay or Transistor type, depending on model)
  • Instruction Set
  • Rich instruction set for arithmetic, logical, and data processing
  • Communication Ports
  • USB, RS-422, Optional Ethernet
  • Program Memory
  • 64K steps (EEPROM)
  • Insulation Resistance
  • >= 5M (500V DC megger between power supply and ground)
  • Input Points
  • 40 (24VDC Sink/Source)
  • Model
  • FX3U-80M
 

P. L. C MITSUBISHI MELSEC FX3U-80M Trade Information

  • Minimum Order Quantity
  • 1 Piece
  • Supply Ability
  • 100 Pieces Per Month
  • Delivery Time
  • 7 Days
 

About P. L. C MITSUBISHI MELSEC FX3U-80M

even during external power supply problems or PLC failure. Otherwise, malfunctions may ... For repair, contact your local Mitsubishi Electric representative.  Turn off the power to the ... 4.7.6 FX3U-80M . ... 19.1 Description of Products (Introduction of Related Products) . ... MELSEC FX3U series manufactured. Models :.

Versatile Connectivity and Expansion

The FX3U-80M is engineered with multiple communication ports, such as USB, RS-422, and Ethernet (via expansion modules), enabling seamless integration into various automation setups. Its expandable design allows users to scale up to 384 I/O points, meeting complex process control requirements in industrial settings.


Flexible Programming and High-Speed Processing

This PLC supports GX Developer and GX Works2/3 programming environments, offering a rich instruction set for diverse arithmetic, logic, and data processing operations. Its high-speed processor ensures rapid execution, making it suitable for real-time control tasks and fast-paced production lines.


Industrial-Grade Durability and Safety

Designed for rigorous industrial use, the FX3U-80M operates in temperatures from 0C to 55C and withstands harsh electrical conditions, with insulation resistance above 5M and a 1500V AC withstand voltage. Its compact, sturdy build and robust performance make it a reliable hub for long-term automation projects.

FAQs of P. L. C MITSUBISHI MELSEC FX3U-80M:


Q: How can I expand the I/O capacity of the FX3U-80M PLC?

A: The FX3U-80M PLC supports I/O expansion modules, allowing you to increase the number of input and output points from the base 80 up to a maximum of 384. These modules can be easily added to suit evolving automation requirements without replacing the main unit.

Q: What programming software is compatible with the FX3U-80M model?

A: The FX3U-80M can be programmed using GX Developer and GX Works2 or GX Works3, offering flexibility for programmers accustomed to various Mitsubishi environments. These software platforms provide support for the controllers full instruction set, including advanced logical and arithmetic operations.

Q: When should I use relay outputs versus transistor outputs with this PLC?

A: Relay outputs are best for switching AC loads and devices requiring electrical isolation, while transistor outputs are ideal for fast-switching applications, such as interfacing with sensors and low-voltage devices. The actual output type depends on the specific FX3U-80M submodel used.

Q: Where can the FX3U-80M be installed for optimal performance?

A: Install the FX3U-80M PLC indoors in a control panel or on a DIN rail within an environment ranging from 0C to 55C. It should be mounted away from excessive dust or corrosive gases to ensure optimum operation and reliability.

Q: What is the process for programming and commissioning the FX3U-80M?

A: Programming involves connecting the PLC via USB or RS-422 to a PC running Mitsubishis GX Developer or GX Works2/3. After programming, commission the system by transferring the program and testing all connected I/O points, sensors, and actuators to validate the logic and ensure safe operation.

Q: How does the backup battery benefit my automation system?

A: The integrated backup battery provides memory retention, safeguarding your programs and data in the event of a power failure. This ensures quick recovery and minimal downtime when power is restored, which is crucial in automated production environments.

Q: What types of communication and connectivity are supported by the FX3U-80M?

A: The FX3U-80M offers USB and RS-422 as onboard ports, with RS-232, RS-485, and Ethernet available via expansion modules. This variety of interfaces supports integration with HMIs, SCADA, and other industrial networks for remote control and data exchange.

P. L. C MITSUBISHI MELSEC FX3U-80M
P. L. C MITSUBISHI MELSEC FX3U-80M
P. L. C MITSUBISHI MELSEC FX3U-80M
Tell us about your requirement
product

Price:

Quantity
Select Unit

  • 50
  • 100
  • 200
  • 250
  • 500
  • 1000+
Additional detail
Mobile number

Email

More Products in PLC(PROGRAMBLE LOGIC CONTROLLER) Category

MITSUBISHI A1SJ71E71-B2-S3 PLC

MITSUBISHI A1SJ71E71-B2-S3 PLC

Minimum Order Quantity : 1 Piece

Temperature : 0C to 55C (Operating)

Mounting Type : DIN Rail/Panel Mount

Application : Industrial Automation, Remote I/O, Factory Automation, Process monitoring

Drive Type : External via PLC Backplane

Get a Price/Quote
OEMAX NX_CPU700P PLC

OEMAX NX_CPU700P PLC

Minimum Order Quantity : 1 Piece

Temperature : 0C to 60C

Mounting Type : DIN Rail Mounting

Application : Industrial Automation, Machine Control

Drive Type : Relay/Solid State Relay Output

Get a Price/Quote
RE10TC Temperature Control Module PLC

RE10TC Temperature Control Module PLC

Minimum Order Quantity : 1 Piece

Temperature : 10C to 55C operating range

Mounting Type : Panel Mount

Application : Temperature Control

Drive Type : Electronic

Get a Price/Quote
MITSUBISHI A1SY50 PLC

MITSUBISHI A1SY50 PLC

Minimum Order Quantity : 1 Piece

Temperature : 0C to 55C

Mounting Type : Panel Mounting

Application : Industrial Automation

Drive Type : Digital Output Module

Get a Price/Quote


TAJ ELECTRICALS

GST : 24ABGPL0867R2Z3

Contact Details
Address
  • C-15, VIP Market, Moti Talav Road,Bhavnagar - 364001, Gujarat, India
Key Personnel
  • Mr Waris Lohiya (MD)
  • Mobile : +919033433835
  • Mr. Juned
  • Mobile : +919426914311
Send Inquiry Send Inquiry
Send SMS Send SMS
Quick Links
Our Products
  • Tradeindia
    TAJ ELECTRICALS All Rights Reserved.(Terms of Use)
    Developed and Managed by Infocom Network Private Limited.
    Back to top