MOXA ioLogik E1214
MOXA ioLogik E1214
MOXA ioLogik E1214
MOXA ioLogik E1214
MOXA ioLogik E1214
MOXA ioLogik E1214
MOXA ioLogik E1214
MOXA ioLogik E1214

MOXA ioLogik E1214

MOQ : 1 Piece

MOXA ioLogik E1214 Specification

  • Dielectiric Strength
  • 1000 VDC
  • Contact Form
  • SPST for outputs
  • Ambient Temperature
  • -10 to 60 C
  • Working Temperature
  • -10 to 60 C
  • Power Consumption
  • 150 mA @ 24 VDC
  • Protect Feature
  • Over-voltage and reverse polarity protection
  • Product Type
  • Ethernet Remote I/O Module
  • Insulation Resistance
  • >= 100 M @ 500 VDC
  • Theory
  • Input/output signal communication and control
  • Usage
  • Remote Ethernet I/O for sensors and actuators
  • Terminal Type
  • Screw terminal block
  • Rated Voltage
  • 24 VDC
  • Supply Terminal
  • 2-pin removable terminal block
  • Size
  • Compact
  • Color
  • Light gray with blue accent
  • Dimension (L*W*H)
  • 115 x 80 x 46 mm
  • Weight
  • 420 g
  • Storage Temperature
  • -20 to 70 C
  • Relative Humidity
  • 5% to 95% RH (non-condensing)
  • IP Rating
  • IP30
  • Protocols Supported
  • Modbus/TCP, TCP/IP, UDP, DHCP, HTTP, SNMP, Bootp
  • Digital Input Levels
  • Logic Low: 0 to 3 VDC, Logic High: 10 to 30 VDC
  • Configuration
  • Web console
  • Digital Outputs
  • 16 channels
  • Communication Interface
  • 2 x 10/100 Mbps Ethernet ports
  • Digital Inputs
  • 16 channels
  • Digital Output Type
  • Sink type, open collector
  • Mounting
  • DIN-rail and wall mounting
  • Digital Input Type
  • Sink or Source, Wet Contact (NPN/PNP) or Dry Contact
  • Digital Output Load Voltage
  • 5 to 30 VDC
  • LED Indicators
  • Power, Ready, DI, DO, Ethernet Link/Act
  • Housing Material
  • Plastic
  • Ethernet Standards
  • IEEE 802.3, 802.3u
  • Digital Output Load Current
  • Max. 200 mA per channel
 

MOXA ioLogik E1214 Trade Information

  • Minimum Order Quantity
  • 1 Piece
  • Supply Ability
  • 100 Pieces Per Month
  • Delivery Time
  • 7 Days
 

About MOXA ioLogik E1214

MOXA ioLogik E1214


Descriptions of Moxa IOLOGIK E1214 provided by its distributors.

Universal Remote I/O, 6 DI, 6 Relay, -10 to 60C Operating Temperature | Moxa ioLogik E1214

RS (Formerly Allied Electronics)

Ethernet Remote I/O With 2-Port Ethernet Switch, 6 Dis, And 6 Relays |Moxa IOLOGIK E1214

Newark

MOXA ioLogik E1214 Remote Ethernet I/O, 6Di/6Relay, 2Port Switch

Zoro

Module Type = Digital I/O Module / Digital Inputs = 6 / Input Type = Digital / Output Type = Relay / Number of Relay Outputs = 6 / Operating Voltage Min. VDC = 12 / Operating Voltage Max. VDC = 36 / Input Current mA = 188 / Termination Type = Terminal Block / Mounting Type = DIN Rail Mount / Mounting Type = Wall Mount / Interface Type = Ethernet / Interface Type = MODBUS TCP / Interface Type = EtherNet/IP / Operating Temperature Min. C = -10 / Operating Temperature Max. C = 60 / Series = E1200 Series / Width mm = 28 / Height mm = 132 / Depth mm = 84



Seamless Integration with Multiple Protocols

The MOXA ioLogik E1214 supports a range of protocols including Modbus/TCP, TCP/IP, UDP, DHCP, HTTP, and SNMP, making it simple to connect with diverse industrial networks. This multi-protocol compatibility enables easy configuration through a web console and ensures flexible adaptation to existing automation systems.


Rugged and Flexible Hardware Design

Engineered to endure challenging environments, the E1214 is rated for operation in temperatures from -10C to 60C and relative humidity up to 95% (non-condensing). Its plastic IP30 housing provides essential protection, and DIN-rail or wall mounting options simplify installation in various settings.


Comprehensive Digital I/O Capabilities

Featuring 16 digital input and 16 digital output channels, the ioLogik E1214 accommodates diverse input types (sink or source, wet/dry contact) and delivers reliable output switching for loads up to 200 mA per channel. Its open collector outputs and robust insulation make it ideal for interfacing with a wide variety of industrial devices.

FAQ's of MOXA ioLogik E1214:


Q: How do I configure the MOXA ioLogik E1214 for use with my Ethernet network?

A: Configuration is performed using the built-in web console, accessible via any standard web browser. Connect the device to your network through one of the dual Ethernet ports, power it up, and enter its IP address in your browser for easy setup, including protocol support and I/O channel settings.

Q: What types of digital input signals does the E1214 support, and how are they wired?

A: The device supports both sink and source-type digital inputs, working with either wet (NPN/PNP) or dry contacts. Input logic levels are defined as Logic Low: 0-3 VDC, and Logic High: 10-30 VDC. Wiring is done via screw terminal blocks, ensuring secure connections in industrial environments.

Q: Where can the ioLogik E1214 be installed, and what mounting options are available?

A: The E1214 can be installed in control panels, machine enclosures, or on equipment frames. Mounting is flexible with support for DIN-rail and wall mounting, allowing you to adapt to different layout requirements in industrial facilities.

Q: What are the primary benefits of using the ioLogik E1214 for remote I/O applications?

A: Key benefits include real-time remote monitoring and control of up to 32 I/O channels, seamless network integration through multiple industrial protocols, robust environmental protection, and convenient installation with compact size and versatile mounting.

Q: How does the device protect against electrical faults such as over-voltage and reverse polarity?

A: The E1214 is designed with integrated over-voltage and reverse polarity protection features, safeguarding its internal circuits and connected equipment from accidental wiring errors or electrical surges.

Q: When should I choose the E1214 over other digital I/O modules?

A: Choose the E1214 if you need a cost-effective, compact module with high channel density, flexible input/output types, broad protocol support, and reliable operation in industrial temperature and humidity ranges.

Q: What indicators are available to help monitor the E1214's operational status?

A: LED indicators on the unit display the status of power, system readiness, digital input/output activity, and Ethernet link/activity, offering instant visual feedback for troubleshooting and monitoring in field applications.

Tell us about your requirement
product

Price:

Quantity
Select Unit

  • 50
  • 100
  • 200
  • 250
  • 500
  • 1000+
Additional detail
Mobile number

Email

More Products in Relay Category

ALLEN BRADLEY MSR131RTP SAFETY RELAY

ALLEN BRADLEY MSR131RTP SAFETY RELAY

Minimum Order Quantity : 1 Piece

Usage : Industrial Safety Applications

Color : Red

Theory : Other , Electromagnetic Relay

Product Type : Safety Relay

Schneider Multifunction Relay EOCR-FDE

Schneider Multifunction Relay EOCR-FDE

Minimum Order Quantity : 1 Piece

Usage : Motor Protection and Monitoring

Color : White & Blue

Theory : Other , Current Relay / Electronic

Product Type : Multifunction Electronic Over Current Relay

MICOM P343211E2M0360K RELAY

MICOM P343211E2M0360K RELAY

Minimum Order Quantity : 1 Piece

Usage : Feeder Differential Protection Relay

Color : Grey

Theory : Other , Microprocessorbased Relay

Product Type : Numerical Protection Relay

ABB REL6704200244295-010 PROTECTION RELAY

ABB REL6704200244295-010 PROTECTION RELAY

Minimum Order Quantity : 10 Pieces

Usage : Industrial Electrical Systems

Color : Gray

Theory : Other , Relay Theory

Product Type : Protection Relay



Back to top