B&R 7AT352.70 ANALOG INPUT MODULE

B&R 7AT352.70 ANALOG INPUT MODULE

B&R 7AT352.70 ANALOG INPUT MODULE

B&R 7AT352.70 ANALOG INPUT MODULE

B&R 7AT352.70 ANALOG INPUT MODULE

B&R 7AT352.70 ANALOG INPUT MODULE

B&R 7AT352.70 ANALOG INPUT MODULE

B&R 7AT352.70 ANALOG INPUT MODULE

Send Inquiry

Request To Call Back

B&R 7AT352.70 ANALOG INPUT MODULE

Get a Price/Quote

MOQ : 1 Piece

B&R 7AT352.70 ANALOG INPUT MODULE Specification

Connectivity Type
Backplane Bus

Processor Type
Module operated (no onboard CPU)

Mounting Type
DIN Rail Mounting

Application
Industrial Automation, Process Control

Phase
Single Phase (system interface)

Load Capacity
Determined by backplane specifications

IP Rating
IP20

Automation Grade
Automatic

Frequency
50/60 Hz (system compatibility)

Control Type
Analog

Sensor Type
Analog Sensor Input

Features
8 Differential or 16 Single-Ended Inputs, Hot Swappable, LED status indication, Galvanic isolation

Weight
Approximately 200 g

Cable Length
As per installation standard

Material
Plastic and Metal Housing

Power
Supplied via I/O Module Backplane

Temperature
0C to +60C (Operating); -25C to +70C (Storage)

Voltage
24 V DC (via backplane)

Model Number
7AT352.70

Resolution
12 Bit

Ambient Humidity
5% to 95% non-condensing

Field Wiring
Removable terminal blocks

Installation Category
II (IEC 61131-2)

Relative Humidity
5% to 95% (operation and storage)

Configuration
Software configurable via B&R Automation Studio

Input impedance
>= 100 k (voltage); 250 (current)

Input Range
10 V, 5 V, 0-10 V, 0-5 V, 0-20 mA, 4-20 mA

Input Type
Voltage or Current configurable

Module Width
37.5 mm

Input Signal Source
Process Sensors, Transmitters (field devices)

Product Series
X20 System

Isolation
Channel-to-bus and channel-to-channel galvanic isolation

Response Time
<1 ms per channel

Diagnostics
Integrated Channel Diagnostics and Status LEDs

Number of Analog Inputs
8 Differential or 16 Single-Ended Channels

About B&R 7AT352.70 ANALOG INPUT MODULE

B&R 7AT352.70 ANALOG INPIUT MODULE

7AT352.70 Description: 2003 analog input module, 2 inputs, PT100 (3-wire connections), -200 to +850C, screw-in module, order 1x terminal block TB712 separately!

Flexible Analog Input Options

The 7AT352.70 module accommodates both differential and single-ended analog signals, allowing users to connect up to 8 differential or 16 single-ended sources. It seamlessly handles a broad variety of process sensors and transmitters, supporting voltage and current inputs suitable for diverse industrial applications.

Advanced Diagnostics and Easy Configuration

Integrated channel diagnostics and status LEDs provide immediate feedback on signal integrity and module status. Configuration is made straightforward via B&R Automation Studio, enabling fast setup and adjustment of parameters such as input ranges and channel functions without manual intervention.

Robust and Reliable in Industrial Environments

With galvanic isolation between channels and bus, IP20 protection, and operation across a wide temperature and humidity range, this module is built for durability. The DIN rail-mountable, hot-swappable design allows for safe and efficient module replacement without halting your process, reducing downtime in mission-critical systems.

FAQ's of B&R 7AT352.70 ANALOG INPUT MODULE:

Q: How do I configure the analog input channels on the B&R 7AT352.70 module?

A: The analog input channels are configured using B&R Automation Studio software. You can select the input type (voltage or current), assign input ranges, and set up channel parameters easily within the software interface-making the process both flexible and efficient for application requirements.

Q: What types of sensors or transmitters can I connect to this module?

A: The 7AT352.70 module is designed for use with a variety of process sensors and transmitters that output analog signals-both voltage (up to 10 V or 5 V) and current (0-20 mA, 4-20 mA). It is suitable for field devices commonly found in industrial automation and process control.

Q: When should I use differential versus single-ended input configuration?

A: Differential inputs are ideal for applications where higher noise immunity and accuracy are needed, such as long-distance sensor wiring or environments with high electrical interference. Single-ended inputs allow for a greater number of channels but with less noise rejection. You can select the configuration based on signal quality and channel count requirements.

Q: Where should I install the 7AT352.70 module for optimal performance?

A: Mount the module on a DIN rail within a control cabinet, ensuring protection against excessive dust or high-moisture environments beyond its IP20 rating. The operating temperature should be between 0C and +60C, with ambient humidity from 5% to 95% non-condensing.

Q: What is the benefit of the module's hot-swappable design?

A: Hot swapping enables you to install or replace the module without shutting down the entire system. This is particularly advantageous for minimizing downtime during maintenance or expansion in critical industrial automation setups.

Q: How does galvanic isolation improve the safety and reliability of my system?

A: Galvanic isolation electrically separates the input channels and the bus, protecting sensitive control electronics from issues such as ground loops and voltage spikes. This enhances both operational reliability and equipment safety.

Q: What integrated diagnostics features does the module offer?

A: The 7AT352.70 provides channel-specific diagnostics and LED status indicators. These features help quickly identify wiring faults, signal issues, or module errors, simplifying troubleshooting and reducing system maintenance time.

B&R 7AT352.70 ANALOG INPUT MODULE

B&R 7AT352.70 ANALOG INPUT MODULE

B&R 7AT352.70 ANALOG INPUT MODULE

B&R 7AT352.70 ANALOG INPUT MODULE

Tell us about your requirement

Price:

Quantity

Select Unit

50
100
200
250
500
1000+

Additional detail

Mobile number

Email

More Products in B&R PLC &HMI Category

Modulation Monitor ART. NO85184

Modulation Monitor ART. NO85184

Price Range 1.00 INR / Piece

Minimum Order Quantity : 1 Piece

Features : Crystal controlled measurement, High accuracy, Digital readout

Weight : Approx 2.5 Kg

Automation Grade : Automatic

Temperature : 0 to 50C

Get a Price/Quote

B&R X20 DO 9332 PLC

B&R X20 DO 9332 PLC

Minimum Order Quantity : 1 Piece

Features : 16 digital outputs, hot swappable, diagnostic LEDs, compact size

Weight : Approx. 150 g

Automation Grade : Automatic

Temperature : 25C to +60C (operation)

Get a Price/Quote

B&R 4PP320.1043-31 (A1600169813) HMI

B&R 4PP320.1043-31 (A1600169813) HMI

Minimum Order Quantity : 1 Piece

Features : HighResolution Display, Fanless Operation, Robust Construction

Weight : Approx. 2.6 kg

Automation Grade : Automatic

Temperature : 0C to +50C (Operation)

Get a Price/Quote

B&R 4PP320.1505-31 HMI

B&R 4PP320.1505-31 HMI

Minimum Order Quantity : 1 Piece

Features : Fanless design, Multitouch support, Integrated web server, Data logging, Easy integration

Weight : Approx. 4.5 kg

Automation Grade : Automatic

Temperature : Operation: 0C to +55C, Storage: 20C to +70C

Get a Price/Quote

✕