ALLEN BRADLEY 1794-AENT PLC

ALLEN BRADLEY 1794-AENT PLC

ALLEN BRADLEY 1794-AENT PLC

ALLEN BRADLEY 1794-AENT PLC

ALLEN BRADLEY 1794-AENT PLC

ALLEN BRADLEY 1794-AENT PLC

ALLEN BRADLEY 1794-AENT PLC

ALLEN BRADLEY 1794-AENT PLC

Send Inquiry

Request To Call Back

ALLEN BRADLEY 1794-AENT PLC

Get a Price/Quote

MOQ : 1 Piece

ALLEN BRADLEY 1794-AENT PLC Specification

Automation Grade
Automatic

Speed Range
Ethernet speed: 10/100 Mbps

Cable Length
Max 100 meters (Ethernet Cat5e/Cat6)

Phase
Single Phase (via DC supply)

Processor Type
Network Interface Processor

Remote Control
Yes

Load Capacity
Depends on installed I/O modules

Weight
Approx. 0.25 kg

Application
Remote I/O, Factory Automation, Industrial Controls

Frequency
47-63 Hz (for related I/O modules)

Mounting Type
DIN rail

IP Rating
IP20

Features
Hot-swappable, redundant media support, diagnostic LEDs

Connectivity Type
Ethernet (RJ45, Dual Ports)

Control Type
EtherNet/IP Network Adapter

Material
High-quality industrial-grade plastic housing with metallic connectors

Power
24V DC

Temperature
Operating: 0C to 55C

Voltage
18-31.2V DC (nominal 24V DC)

Module Type
FLEX I/O Ethernet/IP Adapter

Dimensions
87 x 94 x 56 mm (H x W x D)

Number of I/O Connections
Supports up to 8 I/O modules per adapter

Backplane Current (max)
1.2A @ 5V DC

Product Code
1794-AENT

Configuration
Web-based configuration supported

Communication Protocol
EtherNet/IP

Power Consumption
2.5 W (approx.)

Enclosure Rating
Open device (must be installed in a suitable enclosure)

Status Indicators
LEDs for Module Status, Network Status, and PointBus Status

About ALLEN BRADLEY 1794-AENT PLC

ALLEN BRADLEY 1794-AENT PLC

The Allen-Bradley 1794-AENT is a Flex I/O communication adapter. This adapter is a DIN rail mounted device, which features One (1) Ethernet communication port, used for connection Flex I/O rack to a central, ethernet enabled controller. It supports 10/100 Mbps communication rate with an input voltage requirement of 19.2 - 31.2 VDC.

Flexible Integration for Industrial Automation

The 1794-AENT adapter easily connects FLEX I/O modules to an EtherNet/IP network, leveraging industry-standard protocols for efficient and scalable remote I/O management. Its dual Ethernet ports support redundancy and allow for maximum cable runs of 100 meters. The device's hot-swappable feature minimizes downtime, ensuring operational continuity in dynamic environments.

User-Friendly Configuration and Monitoring

With web-based configuration, the 1794-AENT provides hassle-free setup and live diagnostics. Three LED indicators instantly display module, network, and PointBus statuses, enabling rapid troubleshooting. These features make installation, maintenance, and system expansion straightforward, reducing engineering time and facilitating proactive system management.

FAQ's of ALLEN BRADLEY 1794-AENT PLC:

Q: How does the 1794-AENT adapter connect to an EtherNet/IP network?

A: The 1794-AENT FLEX I/O adapter connects using standard Ethernet (RJ45) ports and communicates over EtherNet/IP. It allows connection of up to 8 FLEX I/O modules per adapter and supports redundant media, enabling reliable data exchange and flexible network architectures.

Q: What is the recommended installation location for the 1794-AENT?

A: As an open device with an IP20 enclosure rating, the 1794-AENT must be installed inside a suitable protective enclosure to ensure safe and reliable operation within industrial environments.

Q: When can I hot-swap I/O modules with the 1794-AENT?

A: I/O modules can be hot-swapped at any time while the 1794-AENT is powered and communicating. The adapter's design supports this feature, which helps reduce downtime during maintenance or module replacement.

Q: What process should I follow to configure the module?

A: Configuration can be performed using the module's web interface. Simply connect the adapter to your network, access its IP address via a web browser, and follow the on-screen prompts to complete setup and diagnostics.

Q: How do the status LEDs simplify troubleshooting?

A: The module provides three separate LEDs to indicate module status, network status, and PointBus status. These allow operators to quickly diagnose connectivity or operational issues without the need for specialized tools.

Q: What are the main benefits of using the 1794-AENT in factory automation?

A: The 1794-AENT offers scalable I/O expansion, remote monitoring, and fast configuration. Its diagnostic features support proactive maintenance, while hot-swapping ensures minimal process interruptions, all contributing to enhanced efficiency in factory automation.

ALLEN BRADLEY 1794-AENT PLC

ALLEN BRADLEY 1794-AENT PLC

ALLEN BRADLEY 1794-AENT PLC

ALLEN BRADLEY 1794-AENT PLC

Tell us about your requirement

Price:

Quantity

Select Unit

50
100
200
250
500
1000+

Additional detail

Mobile number

Email

More Products in ALLEN-BRADLEY HMI & PLC Category

ALLEN BRADLEY 1762-L40AWA

ALLEN BRADLEY 1762-L40AWA

Price 1 INR / Piece

Minimum Order Quantity : 1 Piece

Material : Plastic and Metal Housing

Application : Industrial Automation, Process Control

Weight : Approx. 1.2kg

Temperature : Operating: 0C to 55C

Get a Price/Quote

ALLEN BRADLEY 1747-L532 PLC

ALLEN BRADLEY 1747-L532 PLC

Minimum Order Quantity : 1 Piece

Material : Industrial Grade Metal and Plastic Housing

Application : Industrial Automation, Machine Control, Process Control

Weight : About 0.29 kg (0.64 lbs)

Temperature : 0 to 60C (32 to 140F) operating

Get a Price/Quote

ALLEN BRADLEY 1746-IB32 PLC

ALLEN BRADLEY 1746-IB32 PLC

Minimum Order Quantity : 1 Piece

Material : Plastic and Metal

Application : Industrial Automation, Machine Control

Weight : 0.32 kg (0.70 lbs)

Temperature : 0C to 60C operating

Get a Price/Quote

ALLEN BRADLEY 1769-ECL

ALLEN BRADLEY 1769-ECL

Minimum Order Quantity : 1 Piece

Material : Plastic and Metal

Application : PLC Expansion I/O End Cap

Weight : Approx. 80 g

Temperature : 0C to 60C operating

Get a Price/Quote

✕